#Corellaser laserdrw software software#

LASER ROTARY DEVICE INSTALLATION & ENGRAVING GUIDE It can engraving on curved, rounded or spherical surfaces. This is very important! We don‘t want our customers to lose money and time when they receive the machine.Īttention: This machine is equipped with a rotary axis, and installed extra rotary axis connect Port and Switch. and send you the pictures or video of the samples, then you can confirm if the machine meet your requierments.

We will make samples using the machine that you ordered. And in order to make sure you have bought the right machine, please tell us the type of material you need to engraving or cutting as well as the patterns after you ordering.

If you are not sure if the machine meets your needs, please ask online service.

Please note the voltage you request, if not specified, we will send the local voltage of your destination.

Working temperature: 5 – 40℃, Working humidity: 5% – 95% without condensed steam.

Compatible operating systems: WIN7/WIN8/WIN10 32-bit system is the most stable, also suitable for 64-bit.

#Corellaser laserdrw software software#

Software: Laser engraving Plug-in CorelLASER & Seal Design Software LaserDRW.Cutting thickness: 0-6mm (Acrylic), 0-4mm (hardwood such as Oak, mahogany), 0-6mm (cork such as plywood, plywood, composite board) (Depend on the material).Carving Depth: 0-2mm (Depend on the material) Resolution: Up to 1000 dpi.Engraving Speed: 0-500mm/s Cutting Speed: 0-30mm/s.Automatic lifting height: 150mm Cutting/Engraving accuracy: 0.15mm.Engraving Area: 400x300mm Laser Power: 60W.Communication Interface: USB port Laser Type: CO2 Gas.The quality of patterns to be engraved depends on a lot of factors: engraving speed, laser power, current amperage etc., all of which should be set correctly.

Make sure the bitmaps are of high resolution if you're to use bitmaps, otherwise the patterns to be engraved might be vague.

In LaserDRW, you can directly open image files with extensions such as bmp, dib, jpg, jpeg, png, gif, wmf, emf, pcx, tif, tiff, etc. If you don't have the right CorelDRAW software version, you can use LaserDRW we provided to drive our machine, but you need to making bitmaps in other packages and importing them into the LaserDRW software. Otherwise, you will not be able to use the CorelLASER drive engraving machine. We only provide the Laser engraving Plug-in CorelLASER, Don't provide the drawing software CorelDRAW, so make sure that you have installed the right version CorelDRAW (the CorelDRAW 11, 12, X3, X4, X5, X6, X7 version all are available). With this plugin, you can design graphics directly with CorelDRAW and engraving and cutting directly in CorelDRAW. When use CorelLASER to drive the machine, you should installed the CorelDRAW first, because the CorelLASER is a laser engraving plug-in that plugs into CorelDRAW, So you can only start the CorelLASER after installing CorelDRAW.

There are two software can be used to drive the machine, Laser engraving Plug-in CorelLASER & Seal Design Software LaserDRW, which we all offer to our customers.

It can only engrave the anodized coating / non-metal surfaces).

This machine cannot engrave any metal.